Archives for TEMA Process

Assembly Facility

New Assembly Facility

We are proud to present you our new assembly facility. With this new facility we’ll create new opportunities for assembling parts and machines. Together with our customers we want to grow to our next level. We support the industry in its energy transition, providing the best available technologies for drying products on a industrial scale:
* Reuse residual/waste heat
* Increase the residual heat potential by integrating heat pumps (which leads to energy saving and lower carbon emissions).
* Use electrical heaters for drying […]

Read more
tema process

We are expending our assembly facility (10.000 m2) in 2022!

Tema Process meets the challenges that growth, success and visions also bring with them. In order to meet the logistical challenges, we are constantly developing further. We took the opportunity to invest in our competitiveness for tomorrow. Therefore, we will expand our assembly facility (10.000 m2) in 2022 !
 

Read more
Tema Process Service-Maintenance

Tema Process Service-Maintenance

Our engineers and maintenance technicians are able to perform a wide range of field services and are able to detect defects to critical components at an early stage, reduce & prevent downtime, increase machine lifetime and increase machine efficiency.
The following services are available:
·        Operator training
·        Maintenance training
·        Process analyses
·        Mechanical inspection
·        Preventive maintenance
·        Corrective maintenance
·        Delivery of spare parts
·        Replacement of equipment
·        Service contract
·        Remote control and monitoring
Maintenance Management
The main aim of equipment maintenance is to maintain the functionality of the equipment and to minimize its down time.
For mechanical equipment, […]

Read more
Thermal Process Solutions

Thermal Process Solutions

Tema Process is specialized in thermal process solutions, like: drying, cooling, roasting, steam sterilizing, curing, puffing, calcining, steam stripping etc.
The fluidised bed systems are available from 0,15 m2 up to 36 m2 and are mainly used in the chemical, food/feed, agriculture, mineral and waste & recycling industry.

Read more

TEMA Process 3D model comes to life

Tema Process is specialized in thermal process solutions, like drying, cooling, roasting, sterilizing, puffing, calcining, steam stripping etc.
Our fluidized bed systems are used in the chemical, food/agriculture, mineral and waste & recycling industry.
Some examples: bread crumb, salts, detergent, digestate/manure, fertilizer, seeds, carbon black, cereals, clay, dextrose, spices, tomato pulp, pectine, gelatin, polymers, sand, herbicide, starch, urea, sludge, detergent, biomass, larvae, RDF, limestone, gypsum, lithium hydroxide, EPS beads, cassave, cocoa beans, nuts, soy, aspartame, maltodextrine, sodium gluconate, lactose, oat flakes, rubber, […]

Read more
Tema Process reduces carbon footprint by investing in a new Tesla fleet powered by 100% green solar energy

Tema Process reduces carbon footprint by investing in a new Tesla fleet powered by 100% green solar energy

Tema Process has invested in a new Tesla fleet for its sales and management team. Driving an electric car is about driving greener, with a lower carbon footprint and lower financial running costs. By charging our cars from our own solar panel system we can save even more money on our driving costs, whilst further reducing the carbon footprint, by using our own produced 100% green solar energy.

Read more
Opening of our new assembly facility TEMA Process factory fluid bed dryer manufacturer

Opening of our new assembly facility

Tema process is proud to announce the opening of their new assembly facility, close to our main factory. With this new facility we’ll create new opportunities for assembling parts and machines. Together with our customers we want to grow to our next level. We like share our inspiration, creativity and energy with you.

Read more
VACATURES Projectleiders, Engineers, Tekenaars, TIG Lasser RVS • Monteur buitendienst • Machine operator

VACATURES: Projectleiders, Engineers, Tekenaars, TIG Lasser RVS • Monteur buitendienst • Machine operator

Wegens aanhoudende groei van ons bedrijf zijn wij dringend op zoek naar gemotiveerde werknemers voor de volgende functies: • Projectleiders • Engineers / Tekenaars • Ervaren Plaatwerker / TIG Lasser RVS • Ervaren Monteur buitendienst internationaal • Machine operator – snijbank (laser en plasma) • Leerling Monteur buitendienst int. • Leerling Metaalbewerker • Leerling Machine operator snijbank (laser en plasma) • Leerling plaatwerker/ TIG lasser RVS
Bekijk de vacatures op: temaprocess.com/about/jobs-vacatures
Wij zijn een internationaal opererend bedrijf in Wapenveld, wij ontwerpen en […]

Read more
new sterilizer europe

Erection of NEW sterilizer in Europe

Erection of NEW sterilizer in Europe ! Natural Steam Sterilization:
– For Spices, Herbs, Seeds & Nuts.
– Minimal impact on Color and Flavor.
– No radiation and chemical free.
– Sanitary Clean-in-Place (CIP) design.
– Continuous, repeatable and verifiable process.
– 5 log kill.
– Data logging for traceability.
 
* TEMA Process is member of ESTA, ASTA and Royal Dutch Spice Association

Read more
The 3D model computer-aided design software has taken over the engineering industry

The 3D model computer-aided design software has taken over the engineering industry

3D model – Process Industry : The computer-aided design software has taken over the engineering industry as the standard tool used for drafting and design of mechanical components and assemblies. Immediately, projects were able to go from concept to prototype in record time. A major advantage was the added product design flexibility, which allowed engineers to avoid costly mistakes when changes to the design of one component were not passed along to other affected parts of the assembly.

Read more

Feasibility testing for drying processes [video]

Feasibility testing for drying processes offers valuable information when designing an industrial fluid bed drying system. Feasibility testing offers the opportunity to confirm the viability of your intended process, as well as to work out process variables and other unknown data points, helping to define a recipe for success, and reduce the opportunity for surprises after process scale-up. It is the best to test a sample of products to determine its characteristics and its drying curve. TEMA Process has several […]

Read more
TEMA Process erection supervisors and commissioning engineers

TEMA Process erection supervisors and commissioning engineers

The TEMA Process erection supervisors and commissioning engineers are highly qualified and available for our worldwide customers. The Tema Process supervisor is responsible for the erection of the drying system with the help of local workers. The Tema Process Erection Supervisor is also responsible for planning activities, managing, supervising and monitoring heavy lifting, erection works and activities by workforce while ensuring observation of health, safety and environmental practices at work site and completing necessary documentation as per requirement. #fluidbeddryer
 

Read more