Tema Process Fluid Bed Dryers and Coolers are known worldwide for their high quality and efficient operation. Our Fluid Bed Dryers are used in all types of industries for Drying and Cooling of all kinds of products. When drying large volumes of material, energy consumption is the greatest controllable expense. Tema fluid bed dryers maximize return on investment by reducing energy expenses.
Our service organisation is very busy with replacing old fluid bed dryers from our competitors. These dryers are at their end of their life cycle and are replaced by latest generation of TEMA Fluid Bed Dryers.
Drying of Chemicals. Tema process supplies tailor made designed fluid bed dryers for individual chemical characteristics , of which drying behavior is validated in our laboratory.
PE/PET•Potassium sulphate•Ammonium nitrate•Calcium chloride•Calcium phosphate•Carbonates•Cellulose derivates•CMC Carboyl-Methyl-Cellulose•Detergent•Dicalcium phosphate•Urea•Fertilizer•Sludge•Magnesium chloride•Magnesium sulfate•NPK•Pentaerythride•Pesticide•Pigments•Potassium sulfate•Proppants•Pyrite•Resin•Rubber•Soda•Stearate•Super absorbent polymers•Yeast granules•Herbicides•Carbon Methyl Cellulose•Polymers•Aramide•Welding Powder•Succinic Acid (C4H6O4)•Sodium sulfate•Lauryl Sulfate (SLS) Needles•Resin Beads•Pyrolox•Potassium Sulfate K2SO4 •Potassium Nitrate KNO3•Polymers•PET recyc.•Perkadox•Nickel Sulphate Hexa-hydrate•NH4Cl•Mono-Ammonium Phosphate MAP•Lithium hydroxide monohydrate•Lithium carbonate•Fungicides / Insecticides•FR122P Flame retardant•EPS Expandable Polysterene•Copper Sulfate (CuSO4.5H2O)•CMC Carboxymethyl Cellulose•Aluminium Oxide Powder (Al2O3)• Calcium Nitrate•ABS rubber•Ammonium Sulfate (NH4)2.S04•Ammonium […]
Factory Acceptance Test (FAT in our workshop) of a R&D Fluid Bed Dryer/cooler.
TEMA Process product portfolio includes a wide range of sizes to cover all the steps from R&D (0,16 m2) to production scale (36 m2). Regardless of size, our fluid bed systems with their compact design and their durable structure, will produce results that optimise the production process with outstanding results in quality, cost and time-saving.
In traditional processes for manufacturing breadcrumbs, bread loaves are first dried and then crushed in a pinned disc mill or a hammer mill. Reversing the order — first reducing the size of the bread by milling and then drying the crumbs by means of a Tema Process fluidized bed drier has proved to be a more economical way.
The TEMA Fluid bed dryers are specially preferred in drying in combination with after cooling and heat recovery, resulting in better end product quality and very low energy consumptions.
17x Trucks for transport of an impressive Tema Process Fluidbed Drying System (Fluidbed of 36 m2, Fans, Ducting, PulsJet Filters etc) !
Sand drying: a fluid bed dryer processes granular, free-flowing materials include sand, minerals, clays, organic salts, coal, etc. In a fluid bed, the material being dried is suspended and completely surrounded by the drying air or gas, causing that material to behave like a fluid. Besides keeping the material in a seemingly liquid state, the gas stream is the media for heat and mass exchange. As a result of the intimate gas-to-solids contact, very high rates of heat transfer are […]
Weir for controlling the bed height/ residence time in Fluid Bed Dryers: In an efficiently fluidized bed, the solid material like granules/powders or pellets, are fluidized by an upflow gas.
The wet solids are lifted from the bottom and causes the solids to behave as a fluid. The air velocity is adjusted to keep the moving layer of material fluidized.
At the end of the dryer, the same volume of solid runs over an overflow weir (this can also be a rotating […]
Tema Fluid Bed Dryers, FAT 4x dryers. A Factory Acceptance Test (FAT) is a formal test and inspection work process that is performed at our Tema process workshop and is done when the system is fully fabricated and assembled prior to the shipping. The FAT is to check the functionality and capabilities of the equipment.
